MENU
Home Page
Contact Us
AUTOMATIC BALANCE
CONTROL SERIES
Operation
Features
Specifications
Installation
Weights & Sizes
2-14 Horsepower
UTLITITY SERIES
Operation
Features
Specifications
Installation
Weights & Sizes
1-2 Horsepower
PHONE:
1-800-714-7741
1-269-695-7741
FAX:
1-269-695-7777
|
|
AUTOMATIC BALANCE CONTROL SERIES FEATURES
- SAFETY - No low water danger - self regulating.
- FAMOUS ELECTRODE PRINCIPLE - No tubes or resistance elements to scale, clog or burn out.
- AUTOMATIC BALANCE CONTROL - Eliminates costly troublesome relays.
- VERY HIGH EFFICIENCY - +98%.
- SMALL FOOT PRINT - Vertical construction
- EASY INSTALLATION - Only water + electrical required.
COMPLETE PACKAGED STEAM GENERATORS WITH
BUILT-IN AUTOMATIC BALANCE CONTROL
Two to Fourteen Boiler Horsepower!
For Processing. Speedylectric Steam Generators and electric boilers are the reliable answer for producing high or low pressure steam for molding, laminating, embossing, drying, humidifying, cooking, cleaning, degreasing, sterilizing, vulcanizing, heating, etc. They assure a constant temperature up to 400°F, independent of central boilers...and they can be installed anywhere in your plant - right next to process equipment, if desired.
For Remote Areas where the need for steam is beyond steam lines and where costs of additional piping may be prohibitive.
As an Auxiary Electric Boiler for additional steam capacity, or for weekends, vacations, night work or any off-hour operation independent of the central boiler. Permits shut down of main boilers during summer months.
For Higher Pressures than your central boiler supplies. Main boilers can be operated at lower pressures while a Speedylectric Steam Generator supplies the smaller amount of high pressure steam required.
CONSTRUCTION
Speedylectric Steam Generators are constructed under the ASME power boiler code. Generator cases are constructed with 16 guage steel. Bases are constructed with 1/4 inch steel plate. All case and base surfaces are fully primed and exposed surfaces receive an enamal coating. Each completed unit is fully hydrostatically and operationally tested prior to shipping. All completed units are stamped with ASME "E" symbol stamp.
TRIM
All necessary items are included: Valving, Steam Pressure Gauge, Safety valve, Ammeter, Junction Box (Fused disconnect is customer supplied). Pressure Control Valve, Water Level Control and a Pump & Motor (ir required). Low-water cut-off devices are not required on Speedylectric Steam Generators in that electrodes act as a low water cut-off.
With Speedylectric you gain All these advantages:
· NO EXHAUST · NO FLAME · NO SOOT · NO BLOWERS · NO STACKS
· NO FIRE HAZARD · NO BURNERS · NO LOW-WATER DANGER
· NO FUEL PUMPS · NO TUBES OR COILS TO SCALE
· NO ELEMENTS TO BURN OUT · NO CRITICAL WATER REQUIREMENTS
Contact us for details on the many Speedylectric parts that are interchangeable with Ebcor electrode boiler parts.
Assembled in the U.S.A. for over 50 years.
|
